Best Jet Ski Trailer of 2024

1.5in x 8ft three coated “S” hooks to prevent scratching 3,5300-pound breaking strength and 1100 pounds safe working load

Strap material: 100% high tenacity polyester yarn,Ratchet buckle with rubber hand,black E-coating

The 3rd hook on this set up allows you to properly secure the rear of the ski to the trailer

The straps which is well positioned making it low risk to damage the hull

it is perfect for securing your Jet ski! So much easier to use than the traditional straps that only have 2 hooks The 3rd hook on this set up allows you to properly secure the rear of the ski to the trailer

【SECURELY TRANSPORT】1 Inch x 4 Feet (W x L), 2400 LBS per ratchet strap or 4800 LBS as a pair. Enable a range of distance between the attachment points on your boat, marine, jet, ski or PWC and your trailer of between 12” to 48”. PAULINN ratchet strap tie downs are of importance to fix a boat on the trailer. Without these ratchet straps, the boat will be bounce on the trailer, and leave the trailer when the trailer hit a curb.

【SUPERIOR ANTI-BREAK STRENGTH】Made from heavy duty nylon by premium webbing technic, these tie down straps own high anti-break strength of 2400 lb / 1089 kg and the working load limit of 800 lb / 363 kg. It does not stretch or lose its strength when wet and when it is under the sun exposure.

【ANTI-SCRATCH】Dual metal hooks are coated with soft PVC coating, and the quick release buckles covered by the HOOK&LOOP pads are to avoid scratch. These quick-release buckles are to adjust and fasten your straps easily and efficiently.

【EASY to USE】PAULINN ratchet straps are SELF-CONTAINED in the ratchet mechanism housing to use straightly. You can just simply attach the hooks of your rachet tiedowns straps to designated tie down points on the watercraft and the trailer, then pull the tie down straps to the desired length by sliding the ratchet up or down.

【ENSURE DOT COMPLIANCE】Many US states now require the use of tie down straps ratchet when transporting your equipments. These durable boat trailer tie down straps are designed for the tough USA conditions.

👍★【Replacement Part Number】--Part number：5801632 BY6105 PWC-5A

👍★【 PWC-5A Compatible With Engine】--on-marring, shock-absorbent polyurethane bowstop fits Super Jet, Waverunner, Kawasaki, Polaris, and similar PWCs

👍★【PWC-5A Fits Model】--Fit for JET Ski Waver Runner, SeaDoo PWC,Stoltz BOW STOPS Trailer Bumber PWC-5A & Hitch Pin

👍★【Product Specification】--3 1/2 inch opening,Fastens with 5/8" x 6-1/4" Hitch pin,5/8" hole in Vertical stop

👍★【After-Sales Service 】--- If you have any problems, we are happy to respond,We will reply to you within 24 hours,Please match the part number with part number on the old part to ensure fitment before purchasing.

SECURELY TRANSPORT YOUR BOAT, Jet Ski and other PWC. Prevent damage to your Watercraft by minimizing movement during transportation.

ENSURE DOT COMPLIANCE - Many US states now Require the use of strap tie downs when transporting your marine equipment

EASILY ADJUSTABLE FOR UNIVERSAL USE - Using a convenient Quick Release Buckle, our straps can be adjusted from 18” to 48” in length, making them ideal for securing Boats up to 24', Jet Ski and other PWC to your trailer.

NO MORE LOST STRAPS - Vinyl Coated top Hook includes a Safety Lock to ensure you don't loose them accidentally

BEST IN CLASS 3 YEAR WARRANTY! - Our Premium Marine Products and Accessories come with a Three Year Hassle-Free Replacement Warranty and a 30 days Money Back Guarantee - no questions asked. At WavesRx we strive to always Exceed Your Expectations and if for any reason we fall short of that pledge, please reach out to our 24/7 customer care team and we promise to make it right!

[Protect Your Vehicles]: Preserve the underside of your fishing boat or jet ski with the BISupply Boat Bunk Carpet; Cut and reshape the marine bunker carpet to fit your trailer ramp ensuring your aquatic vehicle easily slides onto the surface

[Cover Inside and Out]: Install trailer bunk carpet to your deck stairs for extra traction with each step; Fishing boat bunk carpet roll provides a comfortable surface inside your boat for your passengers to enjoy; Boat docks can be lined with boat trailer carpet for a sleek design

[Withstand the Elements]: Fast drying polyester allows the bunk board carpet to withstand choppy water, rainy weather, or soaked equipment; Soft marine grade carpet does not retain water making your surfaces safe to walk on

[How to install]: Align black trailer bunk carpet on the board and smooth out creases; Wrap the carpet around the wood allowing a few inches of overhang to each end; Staple or glue carpet to wood (staple and glue not included)

[Package Details]: Fully unrolled, the boat rail carpet measures 13ft (4m) long by 12in (30cm) wide; Excess trailer boat carpet can be used as garage carpet, installed to boat accessories, or fitted on patio furniture; Package includes 1 black roll

SUPERIOR BREAK STRENGTH. Breaking strength is 5000lbs per strap, 10000lbs per pair. Made from thicker nylon webbing, 1.6 inches heavy duty ratchet metal buckle and heavy S hook, Ayaport boat trailer transom tie down straps are over 2 times stronger than 1" ratchet tie down straps, 4 times stronger than traditional marine tie down set. Make you peace in mind that your boat, jet ski, kayak or canoe are secured safely to your trailer during traveling.

EASY AND SAFETY. As simple as hook and tighten. They enable a range of distance between the attachment points on your Boat, Jet ski or PWC and your trailer of between 18” and 48”.

FUNCTIONAL SAFETY LOCK CLIP. Durable coated “S" hook with safety lock clip to ensure your boat equipment is safe during transportation.

USEFUL RATCHET PROTECT BAG. Ratchet protect bag is used to cover ratchet and protect your boat while transport. And it can be used as a store bag when your straps are not in use.

PACKAGE INCLUDE. 2pcs 1.6”x4’ boat ratchet tie down straps, 2pcs protect bag, 1pc install card. Order now!

【TWO YEAR WARRANTY】 Buy with confidence, our product provide 2 YEAR WARRANTY from date of purchase.

【POWERFUL TENSION】Working load at 2600 lbs, breaking strenght at 4500 lbs, works great for bass boat, pontoon boat, Jon boat, Dinghy, Jet ski, Sea Doo, Wave Runner.

【PERFECT WINCH STRAP REPLACEMENT】The winch strap replacement is 2 inch wide and 20 feet long. Standard 2 inch width fit for Most Winches, can work for Hand winch and electric winch.

【A MUST HAVE FOR BOAT AND JET SKI】It makes putting the boat on the trailer much easier because you don't end up with a wad of cable in the middle of the winch when you are pulling the boat up. A must have for Boat Or Jet Ski Loading, Launching ot Retrieving.

【CORROSION RESISTANCE】The strap hook forged by No. 45 steel, harder and more tensile, surface coated with colored zinc, more corrosion resistance than white zinc, seawater and UV corrosion resistance, rust and weather protection.

【Galvanized Tube】HECASA Personal Watercraft dolly was made from high quality galvanized steel tubular, though rust protection treatment, with more efficiency and durability.

【Adjustable Bunks】You can adjust the width and angle of the two bunks to get the best fit for your personal watercraft. There are five sizes to choose here - 12”, 14”, 16”, 18” and 20”, but symmetrical adjustment is recommended to avoid rollover.

【1000LBS Capacity】The capacity of boat storage trailer is up to 1000LBS, which provides convenience to carry personal watercraft, Jet Ski, Sea-Doo, Jon boats, wave runners, dinghies, inflatables, etc.

【Casters with Brake】Each dolly features 4 rugged casters and dual break system to to make transport easier.

【Premium carpet】Felt-covered brackets support the boat securely without creating scratches, synthesize decorative effects and wide functionality.

❆【TYT Winch Capacity】The Heavy duty steel construction hand crank winch has pulling force for 600 lbs / 250 kg, strap Length: 6M (19ft) ø 50MM, Strap Color : Blue, mounting base size: 4.52in x 3.14in, winch Color: black.

❆【Special Surface & Gear】High quality zinc-plating finish boat trailer winch for maximum strength and longevity that resists rust and corrosion. Hardened steel gears, high-efficiency transmission ratio 3.2:1. High carbon steel gears to resist wear and last longer.

❆【Handle Performance】Size: 21cm/8.26in, the curved handle of TYT cable winches makes it easier to turn, to move something 600 lbs or less, anti-slip handle ensures a tight grip for less user fatigue and more productivity while cranking the manual small winch.

❆【Two Way Ratchet】Mooring hook equipped with a safety pawl, which can ratchet forward and backward. The ratchet winch can be used to lift objects, drag boats, or volleyball net, Ideal for towing or loading boats, personal watercraft, and lawn equipment.

❆【Package & Warranty】Standard mounting hole, small portable size, easy to install. The inner box package pass the 1-Meter rejection test, protect the product from damage. 365 days warranty, if you have any problems from our TYT gear winch, please no hesitate to contact us, we will provide 100% satisfaction solution for you. Please take a first step, join TOP YOUR TARGET, we will reach the goal together.

【Great Weight Capacity】Heavy duty procedure and tough material make this item could sustain 660 lbs weight and could used to do various different high weight work.

【Heavy Duty Wheel】This item includes two 10.5''×3.5'' pneunatic tyre which could sustain good pressure and provide secure during the work time.

【Perfect Detail Workmanship】High quality iron wire connecting procedure which could make this cage more durable and solid. And the structure follows the scientific principle and is strong enough to hold cats to play.

【Solid Structure】Structured with heavy-duty wood for extended durability, and the structure follows the scientific principle and is strong enough to hold seed trays, pots and plant growth light.

【Easy to Assemble】This product has straight forward illustrations and descriptions. Every screw and pin has its own code and easy to understand the assemble progress.

【Sturdy and Durable Material】The boat bunk carpet is made of high-quality material to ensure durability and longevity over time. The thick and soft bunk carpeting roll has a strong durable backing, use carpet adhesive, carpet glue, and staples to secure fixed to trailer runner and fenders,boat trailer carpet keeps the hull protected from scratches while loading a boat.

【SIZE】Fully unrolled, the bunk boat trailer carpet 13ft long by 12in wide and 6mm thickness 24oz weight; Larger roll allows you to cover more trailer bunks, Excess trailer bunk carpet can be used as garage carpet, or installed to boat accessories, or fitted on patio furniture.

【Extremely Pliable & Easy to Cut 】 Our bunk carpet for boat trailers is a versatile DIY marine tool, according to your actual situation, it can be easily cut into the appropriate size with a utility blade or scissors to achieve a perfect custom fit. The edges are neat, do not fall off the edges, stylish and beautiful, Ensuring your aquatic vehicle easily slides onto the surface.Easy to clean, just flush with a hose and let the air dry.

【How to install】 Align boat trailer bunk carpet black on the board and smooth out creases, Measure the size of your boat bunks to determine the appropriate size you need to cut, Wrap the carpet around the wood allowing a few inches of overhang to each end; Staple or glue carpet to wood (staple and glue not included).

【Super Protection】 These black bunk carpet with thicker pile height and strong backing. Maximum protection of your boat bottom, jet ski trailer, boat trailer bunks from scratches and damage. Zero water retention enables wood bunks to dry quickly and protects the wood bunks, runners, guides underneath. Used for boats, jet skis, trailers, lifts, etc.

Replace Part number：5801632 BY6105 PWC-5A

Compatible With JET Ski Waver Runner, SeaDoo PWC,Stoltz BOW STOPS Trailer Bumber PWC-5A & Hitch Pin

3 1/2 inch opening,Fastens with 5/8" x 6-1/4" Hitch pin,5/8" hole in Vertical stop

If you have any problems, we are happy to respond,We will reply to you within 24 hours,Please match the part number with part number on the old part to ensure fitment before purchasing.